Puressent Diff Nebul Vera

The Vera nebulizing diffuser can be used with Puressentiel diffusion blends or one of the brand's 100% pure and natural essential oils.

1. Place the diffuser on a stable, clear surface. Plug the USB-C connector of the power cable into the socket on the back of the diffuser base. Connect the USB connector of the power cable to a USB port or a 100-240V AC adapter with a 5V 1A minimum continuous output and plug in the adapter.
2. Set the switch to position (I) or (II) depending on the desired diffusion mode. Remove the reducer from the glass container and pour in the essential oil so that the quantity is between the minimum level indicated in diagram (A) of the instruction manual and the maximum level indicated in diagram (B). Adding essential oil while the diffuser is running prevents any essential oil from seeping into the central pipette.
3- Place the reducer on the glass.
4- To turn off the diffuser, set the switch to position (0). In positions (I) and (II) the switch will turn off automatically after 1 hour.
Empty and clean the device if you are not going to use it for an extended period.

HOW THE PURESSENTIEL VERA NEBULIZING DIFFUSER WORKS
The central dial of the diffuser has 3 positions:

- Position (0): "stop"
- Position (I): "low flow" diffusion for a volumetric power of approximately 60 m²
- Position (II): "High-speed" diffusion for a volumetric power of 100 to 120 m²
In positions (I) and (II), the diffusion alternates (2 minutes on, 1 minute off). A timer starts automatically when the device is switched on, shutting off after 1 hour. The base lights up when the diffuser is on and turns off when it is off.

MAINTENANCE AND CLEANING OF THE VERA PURESSENTIEL DIFFUSER
To get the most out of your Vera diffuser and prevent any malfunctions, carefully follow the maintenance instructions. Failure to follow these instructions correctly may damage the diffuser.

For optimal diffusion, clean the glass container every 15 days. To do so, plug in the diffuser and set the switch to position (I) or (II). Remove the blown glass reducer from the container and pour 90% or 70% alcohol into the container, stir, and empty. Refill with alcohol, respecting the minimum and maximum levels, replace the reducer, and diffuse the alcohol for 2 to 3 minutes. If the alcohol has not been completely diffused, empty the container. You can then use the diffuser normally.

Do not insert any objects inside the glass container, as this could irreparably damage the central pipette. If you are not using your diffuser for an extended period, remember to empty and clean it, as the essential oils may solidify, impairing the diffuser's function and permanently staining the glass container.